National Instruments cFP-20xx Manuel d'utilisateur télécharger pdf (Page 3)

Mounting the Backplane on a Panel

A. Fasten the panel-mount plates to the back of the

cFP-BP-

using a number 2 Phillips screwdriver and

the 8-32 × 5/16 in. countersink screws shipped with

the kit.

B. Bolt or screw the panel-mount

accessory to a panel.

C. Connect the PE ground terminal

on the cFP-BP-

to safety ground.

TIO

102 mm (4 in.)

260 mm (10.25 in.)

102 mm (4 in.)

457 mm (18 in.)

CCAAUUTTIIOONN

Do not use screws longer than

5/16 in. to fasten the panel-mount plates to

the backplane.

CCAAUUTTIIOONN

Disconnect

power before removing the

backplane from the panel.

cFP-20xx Quick Start Guide

National Instruments Corporation

1 2 3 4 5 6 7 8 ... 18 19

Pas de commentaire

National Instruments cFP-20xx Manuel d'utilisateur Page 3