National-instruments PXI/CompactPCI Embedded Computer NI PXI-8108 Manuel d'utilisateur télécharger pdf (Page 18)

Chapter 2 Installation and Configuration

NI PXI-8108 User Manual 2-4 ni.com

Figure 2-2 shows an NI PXI-8108 installed in the system controller slot of

a National Instruments PXI-1042 chassis. You can place PXI devices in any

other slots.

Figure 2-2. NI PXI-8108 Controller Installed in a PXI Chassis

How to Remove the Controller from the PXI Chassis

The NI PXI-8108 controller is designed for easy handling. To remove the

unit from the PXI chassis, complete the following steps:

1. Power off the chassis.

2. Remove any cables that may be attached to the controller front panel.

3. Unscrew the bracket-retaining screws in the front panel. Refer to

Figure 2-1 for the location of these screws.

4. Press the injector/ejector handle down.

5. Slide the unit out of the chassis.

1 PXI-1042 Chassis 2 NI PXI-8108 Controller 3 Injector/Ejector Rail

NI PXI-1042

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 82 83

Pas de commentaire

National-instruments PXI/CompactPCI Embedded Computer NI PXI-8108 Manuel d'utilisateur Page 18