National-instruments PXI/CompactPCI Embedded Computer NI PXI-8108 Manuel d'utilisateur télécharger pdf (Page 63)

Chapter 5 Troubleshooting

As an alternative method, complete the following steps:

1. Power off the chassis.

2. Remove the controller from the chassis.

3. Press and hold down push-button switch SW2 for 2 to 3 seconds.

The switch location is shown in Figure 5-1.

4. Reinstall the controller in the chassis.

Figure 5-1. Clearing the CMOS Contents

1 Push-Button Switch SW2

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 82 83

Pas de commentaire

National-instruments PXI/CompactPCI Embedded Computer NI PXI-8108 Manuel d'utilisateur Page 63